Pocket doors slide completely inside the cabinet wall cavity and disappear from view when open, requiring recessed mounting space. Sliding doors run on the outside face of the cabinet and overlap when opened.

Pocket systems work well for clean aesthetics where doors need to be hidden, while sliding systems are simpler to install and don't require cavity space.

Most standard cabinet doors between 16-19mm thick fall within 15-20kg capacity systems. Heavier timber or glass doors may require 25kg+ rated hardware.

Door width and height also affect loading—larger panels need proportionally higher capacity runners. Always calculate total door weight including any fixtures or glazing.

Some sliding systems allow soft-close dampers to be added as separate components, but this varies by manufacturer. Blum REVEGO includes integrated soft-close from factory.

For retrofit applications, we recommend checking compatibility with your existing track system or considering a complete hardware upgrade for consistent performance.

Bifold systems typically need 25-50mm clearance in front of the cabinet when fully open, significantly less than traditional hinged doors. Top-mounted pivot systems require minimal side clearance but need adequate vertical space for the track.

Check specific manufacturer requirements as panel configuration (2-panel vs 4-panel) affects folding geometry.

Standard cabinet door hardware uses corrosion-resistant materials suitable for normal residential humidity, including laundries and bathrooms with adequate ventilation.

Marine applications or constant high-moisture environments require specialised marine-grade stainless steel components. Contact our technical team for specific environmental requirements.